ERROR MESSAGES ON YOUR CAMERA INDICATE THAT SOMETHING IS NOT WORKING PROPERLY, WHICH SHOULD NOT BE INTERPRETED AS SOMETHING WRONG WITH THE EQUIPMENT.
Some more and some fewer camera manufacturers publicly document the meaning of these error messages. In many cases, the explanation is not so easy to find and is even quite broad or generic when referring to more than one cause, in the same way as the "Check Engine" message does in cars.
As the subject can be as broad as the number of brands and models that may exist in the market, I am going to refer to the most common and recurring error messages displayed only by some cameras.
you may also be interested in How To Repair Canon Camera Lens Error
CANYON
The messages it displays are quite generic and can refer to several causes or reasons at the same time, this can lead to confusion on the part of the less experienced user.Err 01. Communication error between camera and lens. It can be caused by dirty to burnt contacts (on the lens or on the camera). Try another lens and if it still appears you should send your camera to technical service.
Err 02. Communication error between memory card and camera. It can be caused by dirty to burned contacts (on the card or in the camera), it may even be that you use a card that is not compatible with your camera. Try another card and if this does not solve it you should send your camera to the technical service.
Err 04. Card full. The card has reached its capacity or there are bad sectors on the card.
Err 05. The built-in flash is obstructed and cannot reach its shooting position.
Err 06. The sensor cleaning function cannot be completed.
Err 99. Generic error message. As wide and diverse as the number of models that Canon has made, and in most cases, it can only be solved by sending the equipment directly to technical service. Before that, remove the battery for a couple of minutes to see if the error message remains.
How to Remove Scratches From Camera Lens
Err (blinking). It refers to communication failures between the camera and the lens. It is almost always solved by cleaning the contacts that exist in the lens and the camera. This operation must be done carefully as the parts are not too resistant.
If the above does not work, you can try removing the battery for a few minutes and if this does not solve the problem, it is necessary to take the equipment to technical service.
fEE (blinking). Appears when using a type D lens that has not been locked at its tightest aperture. It is solved by selecting the most closed opening.
Triangle and letter F. The camera cannot detect the lens. It should be checked that the lens is correctly placed and secured.
E. Indicates that there is no card in the camera, but if there is one, the contacts may be damaged.
CHA and CHR (flashing). Appears when there is a problem with the card. Most of the time, photos have been deleted or formatted from the computer, but it may also be that the type is not compatible with the camera.
Possible solutions consider formatting the card in the camera, verifying that it is compatible, and cleaning the contacts. If this does not solve it, it may be that the card is damaged and should be discarded.
How To Remove Fungus From Camera Lens
The existing documentation is scant and ambiguous, as in the case of Sony, which offers a multipurpose “camera error” and in their respective manuals, there is not much information either, which does not mean that there are no error messages or that their models are exempt. of failures.
Get to know your photographic team and get impressive results with our next photography courses
NIKON
This brand presents quite specific error messages, and many of these can be fixed with a few simple steps and precautions on the part of the user.Err (blinking). It refers to communication failures between the camera and the lens. It is almost always solved by cleaning the contacts that exist in the lens and the camera. This operation must be done carefully as the parts are not too resistant.
If the above does not work, you can try removing the battery for a few minutes and if this does not solve the problem, it is necessary to take the equipment to technical service.
fEE (blinking). Appears when using a type D lens that has not been locked at its tightest aperture. It is solved by selecting the most closed opening.
Triangle and letter F. The camera cannot detect the lens. It should be checked that the lens is correctly placed and secured.
E. Indicates that there is no card in the camera, but if there is one, the contacts may be damaged.
CHA and CHR (flashing). Appears when there is a problem with the card. Most of the time, photos have been deleted or formatted from the computer, but it may also be that the type is not compatible with the camera.
Possible solutions consider formatting the card in the camera, verifying that it is compatible, and cleaning the contacts. If this does not solve it, it may be that the card is damaged and should be discarded.
How To Remove Fungus From Camera Lens
OTHER BRANDS
The existing documentation is scant and ambiguous, as in the case of Sony, which offers a multipurpose “camera error” and in their respective manuals, there is not much information either, which does not mean that there are no error messages or that their models are exempt. of failures.
Get to know your photographic team and get impressive results with our next photography courses
1 Comments
A web-based bookkeeper gives a scope of bookkeeping administrations over the web, normally through bookkeeping bundles that cover your bookkeeping basics. online accounting services
ReplyDelete